Product Description
Installation
1.Connect the strip and sensor with 4*AAA batteries,choose "MAN" mode and press "ON/OFF" button to make sure the batteries and strip are working.
2.Wipe the surface where the sensor and strip are installed.
3.Tear off the adhesive tape from the sensor and strip,install the led strip and sensor to the fixed position,the sensor toward to the body induction area.
Choose the control switch as your demands("AUTO" or "MAN")
Technical specifications:
Led Qty: 45leds
Color temperature: 6000K
Color: Cold White
Strip length: 1.5M
Power Consumption: 2.4W
Rated voltage: DC 6V
Detection distance:3m - 5m
Detection angle:120 degrees
Battery:4 * AAA batteries (not included)
Working Modes: Manual Mode & Dynamic Mode
Package:
1 * 1.5M LED Strip Lights (no battery included)
1.Connect the strip and sensor with 4*AAA batteries,choose "MAN" mode and press "ON/OFF" button to make sure the batteries and strip are working.
2.Wipe the surface where the sensor and strip are installed.
3.Tear off the adhesive tape from the sensor and strip,install the led strip and sensor to the fixed position,the sensor toward to the body induction area.
Choose the control switch as your demands("AUTO" or "MAN")
Technical specifications:
Led Qty: 45leds
Color temperature: 6000K
Color: Cold White
Strip length: 1.5M
Power Consumption: 2.4W
Rated voltage: DC 6V
Detection distance:3m - 5m
Detection angle:120 degrees
Battery:4 * AAA batteries (not included)
Working Modes: Manual Mode & Dynamic Mode
Package:
1 * 1.5M LED Strip Lights (no battery included)
Product Information
- ☆Motion Activated: The advanced PIR sensor detects,auto switching on when detecting people coming at night or a dark place, turns off in 15 seconds if no more motion, 120-degree sensing range and reliable performance
- ☆ Dual Modes: Manual and Auto.Turn to "MAN",you can control it on/off by the on/off button. Turn to "Auto",it will be in motion sensor status.
- ☆Battery Operated :Requires 4 x AAA batteries (not included) to power it,if continouse using,the batteries could last about 3 hours.But for daily using,it could last 2-4weeks up to the lighting time.
- ☆Easy Installation: Just peel off the 3M Tape,stick it to the wardrobe,connect the strip to the motion sensor box,and stick the strip in your wardrobe.Notice: the 3M Tape could be replace after long time use,so you can keep it steady all the time.
- ☆Widely Used: This light is 6000K cold white,ideal lighting & decoration for closet, counter top, bathroom, Pantry, Attic, Drawer, Hallways, Stairs, Mirror vanity lighting fixtures etc