Product Description
Note:
Please refer to the picture and choose the correct bearing type before you order (sealed or shielded on both sides or single side of the bearing). The suffix in the stock is used only to distinguish between sealed and shielded bearing type. This would not affect the use of our product.
Description:
Single row, pre-laminated, normal accuracy.
The deep groove ball bearings are one of the most commonly used roller bearings. They absorb radial and axial loads in both directions.
With low friction and high speed the ball bearing is cost-effective and low maintenance.
After deterioration, the toughness of carbon steel bearings is superior to those of chrome steel bearings. These low-cost bearings are often used in areas with low demands on Mohs hardness.
Suitable for all kinds of industrial equipment, micromotors, small rotary motors, office equipment and so on.
Help selection:
Shields
(name suffix Z/ZZ) - High speed. Protect from dirt and debris.
Sealed
(name suffix RS/2RS) - Made of steel sheet reinforced NBR (oil and liquid resistant). Lower limit speed as shield bearings.
Specification:
Model: 6309-2RS
Seal type: double sealed.
Inner ring/outer ring material: carbon steel.
Cage material: punched steel.
Inner diameter (d): 45 mm.
Outer diameter (D): 100 mm.
Thickness (B): 25 mm
Dynamic load capacity (Cr): 53000N.
Static load capacity (Cor): 32000N
Accuracy class: P0 (ABEC-1)
Noise level: Z2
Number of packs: 1
Product Information
- 6309-2RS (inner diameter: 125 mm, outer diameter: 245 mm, thickness: 7 mm)
- 6309 2RS bearings are sealed both sides to keep lubricant in stock
- Made from carbon steel, durability and resistance to deformation at high loads
- ABEC Tolerance 1 (P0), Z2 Noise level for most general applications
- Static load capacity of 32000 Newton and Dynamic load capacity of 53000 Newton